Question : Juniper NetScreen-5GT ADSL setup for Dual WAN

Hi all,
I just need verification, or recommend a better solution for the following:
Existing network:

-[IP-VPN Router Local 192.168.6.x]---[Network]

I want to add another ADSL line, but keep access to existing VPN, what im thinking of doing is:

[ NetScreen-5GT ADSL ]
`[ADSL WAN 1]
`[Home Network - 192.168.6.x from IP-VPN Router]
`[Work Network - 192.168.0.x local Network]

This is after changing the Port mode. Im not familiar with Juniper setup, so how can i set this up? including routes between the networks?

Also, any better suggestions is welcome. Particular if possible without Port mode change.

Answer : Juniper NetScreen-5GT ADSL setup for Dual WAN

You need to change the port mode and only then you can have 2 untrust interfaces for WAN connectivity.

The rest is simple, you can use the same configuration as what you've been using except for improvement points with routing, like what to go where and all.

If you have elaborate set of things that you think you'll do after implementing this, let us know and we can follow up.

Cheers,
Rajesh
Random Solutions  
 
programming4us programming4us