Hello
Have a couple of Cisco WAPs 1130AG which connect to a WS-C2950-24
switch and also each to a power injector.
There is a message on the WAPS which states the following:-
LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED WS-C2950-24
I found some information on the web which stated the following:-
This condition occurs when the access point is powered from a power injector but is connected to a switch that supports CDP but cannot provide the full 15.4-W Power over Ethernet (PoE).
However, the message on the WAP does not mention anything about CDP.
Any urgent advice would be truly grateful.
|
