Microsoft
Software
Hardware
Network
Question : Cisco UC 520 not sending 10 digits for outbound calling
My Cisco UC520 will not allow me to change the dialing plan (outgoing) so that it sends the 10 digits down, for our PRI provider to route the call, for some reason it is sending 7, or 8 with long distance, but not sending down the full 10 digits. I have looked everywhere, but can't find anywhere to change it.
Answer : Cisco UC 520 not sending 10 digits for outbound calling
on dial peer 53 try removing prefix 1 and change destination-pattern 91..........
destination-pattern 91[2-9]..[2-9]......
forward-digits 11
Random Solutions
Does anyone know of a tool that can export the list of names inside a security group?
Windows XP - "Connected" adapter, "No N/w functionality"
What if you cannot ping "<a rel="nofollow" href="http://www.komando.com">www.komando.com</a>" by name, but you can ping it by IP address. What might cause this problem? How might you fix this problem?
Changing pptp port
One way voice on Cisco IP Communicator over the VPN
Trusting Domains
Load balance using both ISDN and Leased Line on Cisco 2621 router
How do I connect a Linksys Router to a Broadxent 8120 configured as a Bridge?
RRAS Service Disables Itself
How do I Configure Multiple Gateways?