Question : Enabling PAT on Cisco

Hello

I have a home setup with Comcast Cable.  They have provided me with one Static IP address that I have applied to the external interface of my PIX firewall.  I have a server behind my inside interface that I would like to access using port 3389 (Remote Desktop).  Can you tell my how to configure PAT to allow me to access this from the outside world.  If I had two public address this would be pretty easy as I could use a Static mapping but since I only have one IP address I don't know how to do this.

thanks

Jake


10.0.3.1(inside) ------[PIX}\]------63.43.2.3(ouside)

Answer : Enabling PAT on Cisco

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00800b6e1a.shtml

for all your PIX PAT and NAT answers.

-Marc
Random Solutions  
 
programming4us programming4us