Microsoft
Software
Hardware
Network
Question : using a cisco handset on my lan switch
hi all,
basically my issue is as follows.
i am trying to make a cisco ip phone work across my LAN so that eventually it can be moved to a remote location.
my lan is setup as follows:
range: 192.168.2
subnet: 255.255.255.0
gateway: 192.168.2.168
dns:192.168.2.250
the cisco phone system runs on a 10.1.1 range and has a lan identity of 192.168.2.45
the setup on the phones looks like this:
ip address: 10.1.1.
subnet: 255.255.255.0
default router: 10.1.1.1
dhcp: 10.1.1.1
t
ftp
: 10.1.1.1
my issue is that when a handset is plugged into my lan all i get on the screen is "configuring ip" when i used dhcp and when i use a static config i get "registering"
what do i need to do in order for the phone to find the 10.1.1. addresses/dhcp server?
any help would be greatly appreciated!
thanks,
Arran
Answer : using a cisco handset on my lan switch
sorted! the cisco switch had to have an open gateway enabled for our lan.
Random Solutions
In which particular situation is dd if= of= used when datafile/password/control files are all binary files?
Lotus Notes 8.5 Basic Client
ADUC 3rd Party Tools for Enterprise Use
Linksys router resets every hour.....
CISCO FLASH BACKUP
You do not have sufficient acces to your computer to connect to this printer
How to connect two Different IP Networks
Unable to run RSoP/GPResult
The choice of Transport : TCP or UDP
AD Error: Naming information cannot be located because: