Question : Cisco Unity Express and FXO port Offhook

Hi there

i'm having a issues here with Unity express and the FXO going offhook and does not recive a disconect back.

When you make a normal call to the FXO through PSTN the calls goes through and the call disconnects with no issue and the FXO port goes onhook. Now if you make the call again and the call goes to Voice mail the unity express responds fine but when the caller hangs up the FXO port remains offhook for around 3 mins .

did any body had this issue before
Code Snippet: 
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:

voice-port 0/3/0
 no battery-reversal
 timeouts call-disconnect 3
 timeouts wait-release 3
 connection plar opx 340
 caller-id enable
 
dial-peer voice 6000 voip
 destination-pattern 6...
 session protocol sipv2
 session target ipv4:192.168.100.2
 codec g711ulaw
Open in New Window
Select All

Answer : Cisco Unity Express and FXO port Offhook

does not matter just configure the router with these values.
could you please inform how did you get the freq and cadance?
Random Solutions  
 
programming4us programming4us