Question : configure 2 pvc's on a ds3 with ATM on a serial interface

I have a cisco 7206 with M2t-t3 interface card and I have purchased a ds3 circuit with the following:
this first circuit is 3mpbs
VPI/VCI: 0 / 56

Terminate-from hostname: Hidden for security

L2tp tunnel password: Hidden for security

ATM interface IP: w.x.y.z

Subnet Mask: 255.255.255.252

Type of Interface termination: DS3

this circuit is 6mpbs

VPI / VCI : 0 / 35

WAN IP: a.b.c.d

Subnet Mask: 255.255.255.252

The provider (Sprint) is utlizing ATM but I have serial cards and I am not sure how to make this work.

 

Answer : configure 2 pvc's on a ds3 with ATM on a serial interface

Simple answer is you can't with the hardware you have. For a 7200 you'd need a PA-A3-T3 to terminate an ATM DS3.

The other option would be using an ADSU as described here:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios113ed/113ed_cr/wan_c/wcatmser.htm

But that would still require new hardware.
Random Solutions  
 
programming4us programming4us