Question : Cisco 1760, have problem with IOS software of new routers

I have (35) remote sites using voice over frame, with VIC-2FXS card and software version c1700-sv3y-mz.122-4.YB.bin, new 1760's i just got in have software version c1700-ipbase-mz.123-6c.bin and does NOT recognize vic-2fxs card?

why?
also, if i need to how can i remotely download software version from another working router of mine?

thanks in advance
AL

Answer : Cisco 1760, have problem with IOS software of new routers

The IOS images can be tftp'd onto and off of the routers.  Look at Cisco site on how to update IOS firware to see how this is done.  You will need a TFTP client to do this.  This link shoud tell you some info about the 1700 series as well as instruction on how to upload images, downloading them is the same principle.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/prod_release_note09186a00800811ab.html

I also included this link, althougn its for hte 800 series its explaisn the upload pocesss a little better in my opinion.

http://www.cisco.com/en/US/products/hw/routers/ps380/products_configuration_guide_chapter09186a008007c954.html

I hope this helps.