|
Question : Free Cisco Terminal Software
|
|
I neet to reset the password of the Cisco Switch 2910, therefore I need to send a [break] key to the switch (I use serial cable to direct connect to the switch). But I found that the hyperTerminal of windows cannot send the [break] key to switch to break the bios boot up.
So, I want to ask any free terminal software can send the [break] key to the switch?
Thanks in advance!!!
|
Answer : Free Cisco Terminal Software
|
|
I believe that with the Cisco Catalyst 2900s, during the boot process; you press (and keep pressed) the MODE button on the 2900 until the 1X light goes off, but that time, you would have bypassed the Startup-config.
Hyperterminal or any terminal emulation program can still be used.
Regards,
|
|
|
|