Question : QOS config on Cisco IOS

Hello !!

Can someone help me with QOS configuration on the Cisco router.
I use the Cisco 2600 Series upgraded Cisco IOS to Version 12.4(10a)

This router is connected to a SWITCH Cisco Catalys 2950. I run the VLAN on the Router and Switch.

So I am having problems with IP Telephone, my SIPURA IP tel adapter is having a problems with bandwidth, because all other servers steal the bandwidth from sipura, and it is not possible to use the telephone. So I need to reserve 100 Kb of the bendwidth for Sipura adapter. The sipura adapter is connected trough switch 2950 and it gets the internal iip address from Cisco router 2600 which runs the DHCP server. But I decided to set the internal ip on the sipura as STATIC IP.

Than I hope someone can explain to me how to configure the QOS on Cisco router. And do I need to configure it on the switch too ??

Thank You
Best regards
Steve_I

Answer : QOS config on Cisco IOS

I can't understand what you're saying.

If it works, just put the old small SMC back in place.

Perhaps EE isn't the best way to support your network.  Perhaps you need an onsite consultant to help you out.  Perhaps someone else here on EE will be able to help.

I hereby forfeit the points.