Microsoft
Software
Hardware
Network
Question : How to debug ipsec on Cisco ASA?
I have a problem related to ipsec on a Cisco ASA 5520. Briefly told the problem is when the remote site is initiating traffic againt my site. Traffic initiated from my site is working perfect. When the remote site is initiating traffic sometimes it works and somestimes it is not working. When it is NOT working the log shows the output that I have included in the attached file. So my question is: How can I set up logging on the ASA so that I can see exactly WAHT is causing the problem? The attached file is the result from logging with debug level, but how to see the exact cause of the failure? How to see what proposals the remote gateway is suggesting and so on...?
The really strange thing is that it sometimes work, sometimes not. Any ideas?
Answer : How to debug ipsec on Cisco ASA?
Please us this:
"nat (inside) 0 access-list inside_nat0_outbound
could you show us the config?
Random Solutions
How-to configure Sendmail as a secondary Mx (store and forward) ?
Share files between an IMAC and Windows XP and keep the XP machine isolated from teh Internet
Upgrading Netware 5.0 SP6 to Netware 5.1 SP8
How to setup/install quality outdoor Ethernet and phone jacks
Block Torrents
Connecting 2 Switches together and using a 20 meters CAT5 cable?
DCPROMO - Can not add back to Domain.
DOS,Win95, DUN,
Have been put on a blacklist blocking my IP???
ILO access from public network