Question : Cant ping cisco 5500 sup3 ip address from any vlan but vlan1......

I have a CISCO 5500 (sup3)with a Route Switch Module. Its set up for IP routing using RIP.
I can access the supervisor module on any PC connected to VLAN1 (sup3 address is on vlan1)
I can not ping,telnet or use ciscoview on any other Vlan.

All vlans work just fine

Is there a config Im missing on the sup module?

Thanks

Answer : Cant ping cisco 5500 sup3 ip address from any vlan but vlan1......

You probably don't have a default route set on the sup3. Set the default route to point to the IP address of your vlan1 on your RSM and you should be good to go.

-Eric