Question : Routing between 2 networks on a procurve 2824 switch

I have a couple of procurve 2824 switches and 2 different networks, one 10.0.1.0/24 and one 192.168.150.0/24 and i used to have a cisco router to route between those two networks, but since the router only had 100mbit interfaces i thought id change it...

but i have heard that the procurve switches can act as a router between vlans... if i put each of the networks in there own vlan.

the 192.168.150.0/24 network uses 3 of the switches and the 10.0.1.0/24 uses just 12 ports on one switch... and i cant change the ip:s on that net.

so now im wondering, how can i configure the switch to route between these two networks?
or where can i find documentation that describes the procedure... google came up with nothing on this...

Thanks.

Answer : Routing between 2 networks on a procurve 2824 switch

Hi,

Have you seen this document....

ftp://ftp.hp.com/pub/networking/software/59906023e01-Mgmt-ch16-IProuting.pdf

Cheers,

Karan

PS: I will read the fine print and try and tell u exactly what ur config should be.....