Question : Cisco Voice FXS Busy

I have a Cisco voip lab at home and I have one major problem, hopefully someone will be able to help me out or point me in the right direction at least...
I have a Cisco 2620XM CME router and VIC-2FXS card within a NM-2V network module. I have been unable to get a telephone thats connected to either of the FXS ports to ring.
I can make calls from either of the analog phones connected to the FXS card, voice communication establishes with the IP phones fine.
When I try and call the analog phones from the IP phones I get a busy signal (engaged tone, not a fast busy or re-order)
I cant work out why this is not working, Ive tried changing ring frequencys, phone cables to rollovers to straight through tip and ring to four pin with BT master socket adapter and without.

I can get both analog phone ringers to sound when using the command:
test voice port 1/1/0 relay ring on.

Please find running config and voice port summary below:

CME-Voice#sh run
Building configuration...

Current configuration : 4152 bytes
!
! Last configuration change at 10:09:14 BST Sun Jul 19 2009
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname CME-Voice
!
boot-start-marker
boot-end-marker
!
enable secret
!
no aaa new-model
clock timezone BST 1
no network-clock-participate slot 1
no network-clock-participate wic 0
ip cef
!
!
ip name-server 195.99.65.220
ip name-server 195.99.66.220
!
!
interface FastEthernet0/0
 ip address 192.168.1.99 255.255.255.0
 duplex auto
 speed auto
!
interface FastEthernet0/0.10
 description VOICE_VLAN_10
 encapsulation dot1Q 10
 ip address 192.168.10.1 255.255.255.0
 ip helper-address 192.168.10.254
!
interface FastEthernet0/0.20
 description DATA_VLAN_20
 encapsulation dot1Q 20
 ip address 192.168.20.1 255.255.255.0
 ip helper-address 192.168.10.254
!
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.1.254
!
ip http server
no ip http secure-server
!
!
tftp-server flash:phone/7906-7911/CP7912080003SCCP070409A.sbin alias CP7912080003SCCP070409A.sbin
tftp-server flash:phone/7906-7911/cnu11.8-3-2-27.sbn alias cnu11.8-3-2-27.sbn
tftp-server flash:phone/7906-7911/cvm11sccp.8-3-2-27.sbn alias cvm11sccp.8-3-2-27.sbn
tftp-server flash:phone/7906-7911/dsp11.8-3-2-27.sbn alias dsp11.8-3-2-27.sbn
tftp-server flash:phone/7906-7911/jar11sccp.8-3-2-27.sbn alias jar11sccp.8-3-2-27.sbn
tftp-server flash:phone/7906-7911/SCCP11.8-3-3S.loads alias SCCP11.8-3-3S.loads
tftp-server flash:phone/7906-7911/term06.default.loads alias term06.default.loads
tftp-server flash:phone/7906-7911/term11.default.loads alias term11.default.loads
tftp-server flash:phone/7940-7960/P00308000500.bin alias P00308000500.bin
tftp-server flash:phone/7940-7960/P00308000500.loads alias P00308000500.loads
tftp-server flash:phone/7940-7960/P00308000500.sb2 alias P00308000500.sb2
tftp-server flash:phone/7940-7960/P00308000500.sbn alias P00308000500.sbn
tftp-server flash:phone/7906-7911/apps11.8-3-2-27.sbn alias apps11.8-3-2-27.sbn
!
control-plane
!
!
!
voice-port 1/0/0
!
voice-port 1/0/1
!
voice-port 1/1/0
 cptone GB
 station-id number 110
!
voice-port 1/1/1
 cptone GB
 station-id number 109
!
!
dial-peer voice 110 pots
 description RIGHT_FXS_PORT
 destination-pattern 110
 port 1/1/0
!
dial-peer voice 109 pots
 description LEFT_FXS_PORT
 destination-pattern 109
 port 1/1/1
!
dial-peer voice 90 pots
 description AREA_CODE+STD_6_DIGITS
 destination-pattern 90..........
 port 1/0/0
 forward-digits 11
!
dial-peer voice 91 pots
 description INTERNAT_DIALING
 destination-pattern 900............
 port 1/0/0
 forward-digits 14
!
!
telephony-service
 load 7960-7940 P00308000500
 load 7912 CP7912080003SCCP070409A.sbin
 max-ephones 10
 max-dn 20
 ip source-address 192.168.10.1 port 2000
 system message Cisco CME
 time-format 24
 date-format dd-mm-yy
 create cnf-files version-stamp 7960 Jul 19 2009 10:09:07
 max-conferences 4 gain -6
!
!
ephone-dn  1  dual-line
 number 101
 description 7912 IP PHONE 1
!
!
ephone-dn  2  dual-line
 number 102
 description 7960 IP PHONE 2
!
!
ephone-dn  3  dual-line
 number 103
!
!
ephone-dn  4  dual-line
 number 104
!
!
ephone-dn  5  dual-line
 number 105
!
!
ephone-dn  6  dual-line
 number 106
!
!
ephone-dn  7  dual-line
 number 107
!
!
ephone-dn  8  dual-line
 number 108
!
!
ephone-dn  9
 number 109
 description ANALOG PHONE 1
!
!
ephone-dn  10
 number 110
 description ANALOG PHONE 2
!
!
ephone  1
 description Cisco 7912 in study
 mac-address 001B.D42A.4C93
 type 7912
 button  1:1
!
!
!
ephone  2
 mac-address 0017.956A.676F
 type 7960
 button  1:2
!
!
!
ephone  5
 description PC CIPC
 mac-address 001A.9283.1D4F
 type CIPC
 button  1:5
!
!
!
ephone  6
 description Laptop CIPC
 mac-address 001E.681C.0D4F
 type CIPC
 button  1:6
!
!
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 password
 logging synchronous
 login
!
ntp logging
ntp clock-period 17180016
ntp source FastEthernet0/0
ntp master 3
ntp server 130.88.200.4
ntp server 130.88.200.6
!
end

CME-Voice#


CME-Voice#sh voice port summary
                                           IN       OUT
PORT            CH   SIG-TYPE   ADMIN OPER STATUS   STATUS   EC
=============== == ============ ===== ==== ======== ======== ==
1/0/0           --  fxo-ls      up    dorm idle     on-hook  y
1/0/1           --  fxo-ls      up    dorm idle     on-hook  y
1/1/0           --  fxs-ls      up    dorm on-hook  idle     y
1/1/1           --  fxs-ls      up    dorm on-hook  idle     y
50/0/1          1      efxs     up    dorm on-hook  idle     y
50/0/1          2      efxs     up    dorm on-hook  idle     y
50/0/2          1      efxs     up    dorm on-hook  idle     y
50/0/2          2      efxs     up    dorm on-hook  idle     y
50/0/3          1      efxs     up    up   on-hook  idle     y
50/0/3          2      efxs     up    up   on-hook  idle     y
50/0/4          1      efxs     up    up   on-hook  idle     y
50/0/4          2      efxs     up    up   on-hook  idle     y
50/0/5          1      efxs     up    up   on-hook  idle     y
50/0/5          2      efxs     up    up   on-hook  idle     y
50/0/6          1      efxs     up    up   on-hook  idle     y
50/0/6          2      efxs     up    up   on-hook  idle     y
50/0/7          1      efxs     up    up   on-hook  idle     y
50/0/7          2      efxs     up    up   on-hook  idle     y
50/0/8          1      efxs     up    up   on-hook  idle     y
50/0/8          2      efxs     up    up   on-hook  idle     y
50/0/9          1      efxs     up    up   on-hook  idle     y
50/0/10         1      efxs     up    up   on-hook  idle     y

Any help at all would be great.

Thanks,
Rick

Answer : Cisco Voice FXS Busy

remove the ephone-dn 9 and 10 and it will work directly.