Microsoft
Software
Hardware
Network
Question : IDEATA.HAM error message when trying to install Novell Netwear 6.5
Trying to install Novell Netwear 6.5 on a new HP Proliant DL380 G5 with a HP SMart Array E200/128 card. I go through the install fine but once it starts to load drivers I receive the following error - the following driver instance failed to load and will be deleted: Z:\Drivers\IDEATA.HAM Slot = 10041 (the device supported by the driver may be disabled) If I continue past this message the server reboots and when it comes back up it looks like I am in a dos based novell (no gui). I also tried downloading a new version of IDEATA.HAM and adding it via a floppy when I received that error message but it says it's searching the floppy and it may take a few minutes but that message never goes away. I let it run for like 5 minutes before I manually rebooted the server. I am new to Novell so I don't know if I am doing this right or not. Any help would be greatly appreciated! Thanks in advance
Answer : IDEATA.HAM error message when trying to install Novell Netwear 6.5
This is the latest release, and it does support Netware:
http://h20000.www2.hp.com/
bizsupport
/TechSuppo
rt/
Softwar
eDescripti
on.jsp?lan
g=en&cc=us
&prodTypeI
d=15351&
pr
odSeriesId
=1121516&p
rodNameId=
3288134&sw
EnvOID=106
4&
swLang=8
&mode=2&ta
skId=135&s
wItem=MTX-
a8f7363b3e
0944789871
f6a731
Which version of the install discs are you using? Always use the latest overlays from
http://download.novell.com
- the current being Netware 6.5 Support Pack 7.
SP7 Overlay DVD:
http://download.novell.com
/Download?
buildid=Rv
Pp08vWolk~
SP7 Overlay CD's:
http://download.novell.com
/Download?
buildid=t7
NW33NV2Fw~
http://download.novell.com
/Download?
buildid=0w
7TS4sapmc~
Random Solutions
Configuring two NIC's
Configure Exchange server to use ISP's SMTP server
Trying To Set Up An Home DSL Network
Track bandwith usage on Cisco pix 515e firewall
VPN client unable to connect with VPN server
Sending e-mails for users using their e-mail address as reply e-mail (like LinkedIn)
WinXP VPN connection - DNS queries are sent to wrong DNS server
How do i configure my T1 Line? PLEASE HELP!!!
DNS Loopback Problem on Watchguard Firebox - 500
Email Rejection, X-Loop: OutOfSpace