|
Question : Router configuration error
|
|
I have sucessfully set up TCP/IP and IP Tunnel with three servers over a WAN, I was trying to set up a fourth, and I ended up with a router configuration error when I tried to bind IPX to IP tunnel.
The error is as follows:
8/5/97 2:52:41 pm: 1.1.112 Router configuration error detected Router at node 0000C6010804 claims network 00000005 should be 00000006
---
Network 6 is the IPX Net number we would like to use, and network 5 is the IPX number already in use by another card.
We have already tried reset router, with no luck. We have also tried various other network numbers.
Thanks in advance
|
Answer : Router configuration error
|
|
When servers connect to eachother, network numbers on this connection have to be the same. Change the appropiate number of your network cards (Autoexec.ncf: NET=x) which connect to eachother. Both of them must be 5 or both must be 6.
|
|
|
|