|
Question : After trying to test see how call manager would respond to two incoming calls on my FXO port I suddenly cannot receive incoming calls
|
|
I recently figured out how to route incoming calls to an IP phone from an FXO port using the connection plar opx xxxx command. Since I got that working I wanted to see what would happen if another call came in on the FXO while another incoming call was in session. Well I could not get the call to go through on the IP phone because I didn't hear the call waiting beep. After doing the testing I discovered that I could not get call manager to send the calls to my ephone anymore. The phone just keeps ringing until it goes to voicemail.
I am just a MagicJack on my FXO connection and I am able to make calls just fine.
Here is the debug output when an incoming call comes in.
Aug 26 05:30:39.622: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=3132932123, Called Number=, Voice-Interface=0x856134D4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
Aug 26 05:30:39.622: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=1
CME_VOICE#
Aug 26 05:30:45.642: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 6CBDC6AB913811DE8013DB3FBBCA464D, SetupTime 22:30:39.618 PACIFIC Tue Aug 25 2009, PeerAddress 3132932123, PeerSubAddress , DisconnectCause 3F , DisconnectText service or option not available, unspecified (63), ConnectTime 22:30:45.642 PACIFIC Tue Aug 25 2009, DisconnectTime 22:30:45.642 PACIFIC Tue Aug 25 2009, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
CME_VOICE#
Aug 26 05:30:45.646: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:08/25/2009 22:30:39.630,cgn:3132932123,cdn:1002,frs:0,fid:6,fcid:6CBDC6AB913811DE8013DB3FBBCA464D,legID:6,bguid:6CBDC6AB913811DE8013DB3FBBCA464D
CME_VOICE#
Aug 26 05:30:55.375: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Calling Number=, Called Number=, Voice-Interface=0x856134D4,
Timeout=TRUE, Peer Encap Type=ENCAP_VOICE, Peer Search Type=PEER_TYPE_VOICE,
Peer Info Type=DIALPEER_INFO_SPEECH
Aug 26 05:30:55.375: //-1/xxxxxxxxxxxx/DPM/dpAssociateIncomingPeerCore:
Result=Success(0) after DP_MATCH_PORT; Incoming Dial-peer=1
CME_VOICE#
Aug 26 05:31:01.383: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 1, ConnectionId 7620CCC1913811DE8017DB3FBBCA464D, SetupTime 22:30:55.379 PACIFIC Tue Aug 25 2009, PeerAddress , PeerSubAddress , DisconnectCause 3F , DisconnectText service or option not available, unspecified (63), ConnectTime 22:31:01.373 PACIFIC Tue Aug 25 2009, DisconnectTime 22:31:01.373 PACIFIC Tue Aug 25 2009, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
CME_VOICE#
Aug 26 05:31:01.383: %VOIPAAA-5-VOIP_FEAT_HISTORY: FEAT_VSA=fn:TWC,ft:08/25/2009 22:30:55.383,cgn:,cdn:1002,frs:0,fid:7,fcid:7620CCC1913811DE8017DB3FBBCA464D,legID:7,bguid:7620CCC1913811DE8017DB3FBBCA464D
|
Answer : After trying to test see how call manager would respond to two incoming calls on my FXO port I suddenly cannot receive incoming calls
|
|
Nevermind I figured it out. It was my after-hours policy
|
|
|
|
|
