Question : Cisco Pix 506E - Need to enable Telnet & ICMP between all public IPs.

I have two SBS2003 servers running two different Exchange domains on the same physical network connected to a Cisco PIX 506E.  There is no domain trust policy set up between the two because of OS restrictions.  (I will be asking a separate question about adding a second e-mail domain to an SBS 2003 server if it is possible and step-by-step idiot-proof instructions)

I am getting "this message is delayed" when trying to send e-mail from domain A to domain B.  

I tried pinging mail.domainA from mail.domainB and the request is timing out.  

How should I configure the PIX firewall to allow the two to talk to each other (enable all ports between all private IPs, private-to-public IPs for telnet, ftp, etc..) using CLI?

mail.domainA = public IP 1.1.1.1, private IP 3.3.3.3
mail.domainB = public IP 2.2.2.2, private IP 4.4.4.4

Please help as soon as you can.  I need this fixed as soon as possible!

Thanks!

Answer : Cisco Pix 506E - Need to enable Telnet & ICMP between all public IPs.

You may be able to get arround this using DNS rewrite option - It's a simple tickbox in the PDM of the firewall, but if your using CLI to configure you may want to take a look at the article below (DNS Inspection):

http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a008054c520.html#wp1335922