Question : check open port

hi all
How could I know that my firwall block some network port. on other word, I am using some software on my PC. The software require that the some port  is not Blocked. Is there any command that I can check with it if that port is blocked or not  I need to find the ports that are not Blocked! (Not necessary open at that time)
iam using windows XP on my PC
i need command not tool

thanks

Answer : check open port

A valid command for this would look like this:

tracert www.microsoft.com
or
tracert 123.45.67.89

Usage: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout] target_name

Options:
    -d                 Do not resolve addresses to hostnames.
    -h maximum_hops    Maximum number of hops to search for target.
    -j host-list       Loose source route along host-list.
    -w timeout         Wait timeout milliseconds for each reply.

Another useful command is netstat

You can get all kinds of useful info on what applications are using what ports and protocols

C:\Documents and Settings\Owner>netstat /?

Displays protocol statistics and current TCP/IP network connections.  I find the following to be very useful:

netstat -bov

NETSTAT [-a] [-b] [-e] [-n] [-o] [-p proto] [-r] [-s] [-v] [interval]

  -a            Displays all connections and listening ports.
  -b            Displays the executable involved in creating each connection or
                listening port. In some cases well-known executables host
                multiple independent components, and in these cases the
                sequence of components involved in creating the connection
                or listening port is displayed. In this case the executable
                name is in [] at the bottom, on top is the component it called,
                and so forth until TCP/IP was reached. Note that this option
                can be time-consuming and will fail unless you have sufficient
                permissions.
  -e            Displays Ethernet statistics. This may be combined with the -s
                option.
  -n            Displays addresses and port numbers in numerical form.
  -o            Displays the owning process ID associated with each connection.
  -p proto      Shows connections for the protocol specified by proto; proto
                may be any of: TCP, UDP, TCPv6, or UDPv6.  If used with the -s
                option to display per-protocol statistics, proto may be any of:
                IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, or UDPv6.
  -r            Displays the routing table.
  -s            Displays per-protocol statistics.  By default, statistics are
                shown for IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, and UDPv6;
                the -p option may be used to specify a subset of the default.
  -v            When used in conjunction with -b, will display sequence of
                components involved in creating the connection or listening
                port for all executables.
  interval      Redisplays selected statistics, pausing interval seconds
                between each display.  Press CTRL+C to stop redisplaying
                statistics.  If omitted, netstat will print the current
                configuration information once.