Question : Lost  password on 3COM hubs

I have a client with several 3COM superstack II PS Hub 40's.  They have had them for 6+ years and now no one knows the passwords to gain entry to manage them.  They have tried all the defaults and every password they have.  3COM won't help because they are out of warranty, and the only thing I could find on their site said to RMA the hub or have a 3COM tech come out.  Does anyone know a way to reset these hubs to factory defaults?

Answer : Lost  password on 3COM hubs

Here is some info that might help.

PROBLEM:       3Com® CoreBuilder and SuperStack II LAN swithces may be
               vulnerable to security breaches caused by unauthorized access
               via special logins.                                                                    
DAMAGE:        By exploiting this vulnerability, remote users may gain
               unauthorized access to switch configuration information.
SOLUTION:      Perform the recommended password changes detailed in this
               advisory.
--------------------------------------------------------------------------------VULNERABILITY  Exploit information involving this vulnerability has been made
ASSESSMENT:    publicly available.
--------------------------------------------------------------------------------
[Start 3Com® Advisory]

3Com® Security Advisory for CoreBuilder and SuperStack II Customers

3Com is issuing a security advisory affecting select CoreBuilder LAN
switches and SuperStack II Switch products. This is in response to the
widespread distribution of special logins intended for service and
recovery procedures issued only by 3Com's Customer Service Organization
under conditions of extreme emergency, such as in the event of a
customer losing passwords.

Due to this disclosure some 3Com switching products may be vulnerable to
security breaches caused by unauthorized access via special logins.

To address these issues, customers should immediately log in to their
switches via the following usernames and passwords. They should then
proceed to change the password via the appropriate Password parameter
to prevent unauthorized access.

CoreBuilder 6000/2500     - username: debug password: synnet
CoreBuilder 7000     - username: tech password: tech
SuperStack II Switch 2200     - username: debug password: synnet
SuperStack II Switch 2700     - username: tech password: tech

The CoreBuilder 3500, SuperStack II Switch 3900 and 9300 also have these
mechanisms, but the special login password is changed to match the admin
level password when the admin level password is changed.

Customers should also immediately change the SNMP Community string from the
default to a proprietary and confidential identifier known only to authorized
network management staff.  This is due to the fact that the admin password is
available through a specific proprietary MIB variable when accessed through
the read/write SNMP community string.

This issue applies only to the CoreBuilder 2500/6000/3500 and SuperStack II
Switch 2200/3900/9300.

Fixed versions of software will be available from 3Com for all of these
products by Wednesday 20th May 1998.

General administration of these systems should still be performed through
the normal documented usernames and passwords. Other facilities found under
these special logins are for diagnostic purposes and should only be used
under specific guidance from 3Com's Customer Service Organization.

For more information 3Com has dedicated a hotline at 1-888-225-1733, or you
can contact your local 3Com Customer Service location.