Microsoft
Software
Hardware
Network
Question : remote desktop to my new Windows 2008 server doesn't work
I have a new installation of server 2008 Standard. I have both NICs enabled one goes to my main domain network and the other goes to a private backup netowrk with the backup server and all the other servers. With the private NIC enable I can not remote desktop to the system. If I unplug the Private network incomming RD immediately works. From this server I can RD to anyother system with or with out the private network enabled. I can ping the server on its public/domain netowrk NIC from other servers or Workstations, but when it ping itself the response is...
ping rcitbu2
Pinging RCITBU2.CDX.com [::1] from ::1 with 32 bytes of data:
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Reply from ::1: time<1ms
Ping statistics for ::1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
I suspect this has something to do with this...
Answer : remote desktop to my new Windows 2008 server doesn't work
The IP address by itself did work, but now I've fixed the problem by making sure the private network was set as a private network.
Random Solutions
telneting into smtp server, what reply to 'authenication required'?
Need suggestions on OCS with existing analog phone lines
How do I prevent Secondary MX from being used to relay junk mail to Primary?
How to set up DHCP Server in Windows Vista
System Attendant Service failed
hping like tool for W2K
XP constantly losing server connections
Cisco CM Reporting
How can I Backup the DNS and Restore it?
Setting up WEP